Rack Milling Cutters
ESGI produces high precision RACK Milling Cutters for cutting steering rack on Milling machines as per customer-specific needs. These cutters are produced in Single or multiple rows with straight or spiral flutes with very close tolerances.
- Range from 0.5 to 6.0 Module
- Diameter from 50mm to 290mm
- Accuracy class up to AAA
- Made with varied pitch and taper outer diameter.
- Made for profiles with corrections.
- Manufactured in M35, ASP2030, ASP2052 & S390 materials.
- Supplied with all types of coatings
Bandsaw Cutters
ESGI produces highly critical Milling Cutters These Cutters are used for Teeth Cutting of Bandsaw Blades.
Cutters are produced from 24TPI to 4 TPI as per customer requirement.
Worm Milling Cutters
ESGI produces Worm Cutters for cutting Worm Shaft.
Cutters are also produced with a special chip breaker for improved chip flow and better finish.
- Module Range: up to 25 Module or 1DP
- Accuracy class: Up to AA
- Diameter: Up to 330mm
- Manufactured in M35, ASP2030, ASP2052 & S390 materials.